Ok, I have a 91 integra ; second gen B16a, CTR cams/ ITR valvetrain, Tanabe catback, Skunk2 sprockets, mild head port. I am looking at my engine management options since the motor is run obd0.

I am looking for the best system since I use this car as my daily. What do you fellas recommend? VTEC controller? chipped ECU? I am not going to convert to obd1, so just keep that in mind.

Thanks for the help

 

Chip the ecu and use turboedit. Why don't you want OBD1?

 

i am not going to go too crazy as far as mods go with it... so I want just a basic tuning program that will compliment the cams..

 

any1 else?

 

There's a lot to be learned at http://www.pgmfi.org

Read all you can there, and you should be set. The hardware isn't free, but it's a lot cheaper than anything you'd buy pre-made.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by drdisco69 &raquo;</TD></TR><TR><TD CLASS="quote">There's a lot to be learned at http://www.pgmfi.org

Read all you can there, and you should be set. The hardware isn't free, but it's a lot cheaper than anything you'd buy pre-made. </TD></TR></TABLE>

site looks pretty good.. time to start readin! thanks