Notices
Tech / Misc Tech topics that don't seem to go elsewhere.

electrical load detector

Thread Tools
 
Search this Thread
 
Old 07-28-2003, 08:53 PM
  #1  
Junior Member
Thread Starter
 
Fatty_1775's Avatar
 
Join Date: Jul 2002
Location: Winnipeg, Canada
Posts: 435
Likes: 0
Received 0 Likes on 0 Posts
Default electrical load detector

what is the purpose of the electrical load detector? i get it at the odd times when i am at high rpms. when i restart the car, the cel goes away. also, i have a high pitched sound at the alternator at times, could that be the problem? thanks guys!
Old 07-29-2003, 03:27 PM
  #2  
Junior Member
Thread Starter
 
Fatty_1775's Avatar
 
Join Date: Jul 2002
Location: Winnipeg, Canada
Posts: 435
Likes: 0
Received 0 Likes on 0 Posts
Default Re: electrical load detector (Autobot_Killer)

bump
Old 07-29-2003, 08:59 PM
  #3  
Junior Member
Thread Starter
 
Fatty_1775's Avatar
 
Join Date: Jul 2002
Location: Winnipeg, Canada
Posts: 435
Likes: 0
Received 0 Likes on 0 Posts
Default Re: electrical load detector (Autobot_Killer)

what if it was unplugged?
Old 07-30-2003, 05:10 AM
  #4  
Honda-Tech Member
 
JimBlake's Avatar
 
Join Date: Jan 2003
Posts: 8,132
Likes: 0
Received 4 Likes on 4 Posts
Default Re: electrical load detector (Autobot_Killer)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Autobot_Killer &raquo;</TD></TR><TR><TD CLASS="quote">what is the purpose of the electrical load detector?</TD></TR></TABLE>
It measures the electrical load from all the stuff that's turned on. When you turn on lots of stuff (lights, wipers, 700w amp...) the alternator takes more power to turn. The ELD gives the ECM advanced 'warning' so it can be prepared to use the IACV to hold the idle steady.

If it didn't work, then when you turn on all that stuff your idle speed wouldn't be real steady.
Old 07-31-2003, 04:11 PM
  #5  
Junior Member
Thread Starter
 
Fatty_1775's Avatar
 
Join Date: Jul 2002
Location: Winnipeg, Canada
Posts: 435
Likes: 0
Received 0 Likes on 0 Posts
Default Re: electrical load detector (JimBlake)

On my ecu, there is no wire connected to where the electrical load detector part. Never had this before. Can anyone help me? Please? I can't floor the car without getting this all the time. Happens only sometime. What would make my car get a code 20? Starting to get irritating.


Modified by Autobot_Killer at 2:19 AM 8/1/2003
Old 07-31-2003, 05:38 PM
  #6  
Junior Member
Thread Starter
 
Fatty_1775's Avatar
 
Join Date: Jul 2002
Location: Winnipeg, Canada
Posts: 435
Likes: 0
Received 0 Likes on 0 Posts
Default Re: electrical load detector (Autobot_Killer)

also, when i reset the ecu, i have removed the fuse and even unplugged the ground off the battery for 15 minutes, the code still shows, but no cel.
Old 08-02-2003, 06:05 AM
  #7  
Honda-Tech Member
 
JimBlake's Avatar
 
Join Date: Jan 2003
Posts: 8,132
Likes: 0
Received 4 Likes on 4 Posts
Default Re: electrical load detector (Autobot_Killer)

My Helm book indicates the ELD is for USA only??? With your mix of JDM engine, idunno what ECM, maybe your ECM is looking for an ELD that isn't there.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CR3X
Honda CRX / EF Civic (1988 - 1991)
7
03-12-2008 07:17 PM
Fat Chick Magnet
Acura Integra
11
08-08-2006 06:57 AM
JDMFreak
Honda Civic / Del Sol (1992 - 2000)
2
12-30-2005 11:37 AM
psyonicdeath
Honda Civic / Del Sol (1992 - 2000)
10
07-28-2005 10:07 PM
Seedc2
Acura Integra
4
03-06-2004 07:48 PM



Quick Reply: electrical load detector



All times are GMT -8. The time now is 09:20 PM.