After getting to look at your ECU Pics I just want to know. Did you solder the SST EPROM directly to the board without the use of a zif socket?

I doubt that you can blame anything but your lack of experience on this one. You may want to think about getting rid of some of that extra solder around the EPROM Chip pins. Unless that's just the flash. It looks like pins 26 and 27, possibly 28 are almost soldered together with overflow. You may find that to be a problem as well if the solder is close enough to jump. Again it may just be the lighting, I don't want to doubt your skilz.

How do you plan on tuning that if the chip is soldered to the board?

 

Not to mention if he kept the soldering iron on the chip foot a long time, it can overheat the chip. beginners tend to do that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MiamiEgGSr &raquo;</TD></TR><TR><TD CLASS="quote">DUDE YOU HONESTLY GONA TELL ME I ORDERED THE WRONG ONE !!!!!!!!!! THATS F&gt;&gt;&gt;ING CRAP .. </TD></TR></TABLE>



And in that link you posted...the OP says that he ordered the wrong board # too!!!!

Enough said....

 

OK.. Ill admit that it was OVERLOOKED and I ACCEPTED IT LIKE that!!! But why dont you print the Email i sent you before hand?????? staing I had a 1720 board!!!

Well regardless of the fact the issue is solved and the ecu is working .... I just think You could have handled the SITUATION BEtter and ILL ADMIT that I HAD FAULT IN IT , cause I accepted the order wich was wrong!!!!!!!!!!!!!!!!

Thanx
Julio

 

This is the only email I have from you...sent to us on a Sunday, we replied to you on Monday at 10am (less than one hour after my employees come in). It says nothing about a 1720 kit...

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">
From: Xenocron Tuning Solutions [mailto:customerservice - AT - xenocron.com]
Sent: Monday, February 04, 2008 10:09 AM
To: 'julio martinez'
Subject: RE: Order Process

The parts you mentioned are part of our chip kit (those are what we call “USDM extras”), which you did not purchase. You ordered a single basemap chip and VTEC conversion parts, which do not come with the USDM extras.

-Jay
From: julio martinez [mailto:juliowork@yahoo.com]
Sent: Sunday, February 03, 2008 5:33 PM
To: XENOCRON
Subject: Re: Order Process

Hi i recently got your product and I realized that theirs some stuff missing!!! I order a vtec conversion and a Chip
I did not get 74 HC373 chip, R54 should be filled with a 1k to 1.2k resistor, C51 and C52 are 0.1µf ceramic disc capacitor.. I got these from PGFMI link offYOUR site....

XENOCRON &lt;customerservice - AT - xenocron.com&gt; wrote:

Xenocron Tuning Solutions
------------------------------------------------------
Order Number: 1016
Detailed Invoice: https://www.xenocron.com/catal...=1016
Date Ordered: Thursday 24 January, 2008

i have a obd1 b18c(gsr ) intake, intake manifold , headers, exhaust !!! vtec @ 4,600 and redline @9,000

also this will be a going on a p06 that i will be converting from auto to manual

Products
------------------------------------------------------
1 x VTEC Conversion Parts Kit (OBD1 ECU) (VTEC-Conv) = $19.00
Board Type 11F0
1 x Basemap Chip - Xenocron Custom (Basemap-Chip) = $25.00
------------------------------------------------------
Sub-Total: $44.00
United States Postal Service (1 x 0.495lbs) (PRIORITY (2 - 3 Days)): $8.10
Points Redeemed: -$1.00
Total: $51.10

Delivery Address
------------------------------------------------------
julio martinez
2010 sw 16 st
miami, FL 33145
United States

Billing Address
------------------------------------------------------
julio martinez
2010 sw 16 st
miami, FL 33145
United States

Payment Method
------------------------------------------------------
PayPal Direct Payment (Credit Card Payment)


________________________________________
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
</TD></TR></TABLE>

I'm not sure what I could have really done any differently, I'm sure others would agree. I apologize if I have offended you, FWIW.

 

BTW how did u get it working.I BET IT WAS SOMETHING U INSTALLED WRONG OR BACKWARDS.and since u bought the wrong kit for your board.sounds to me like u shouldnt be doing ecu work of any kind,and i have never seen or hear of Xenocron giving out bad info.ive ordered from him many many times and NEVER had a problem.dont try to ruin his name of your stupidity


and i got a question!!!

what gave u the dumbass ideal to just solder your sst in the board like that??thats straight ghetto! not to mention it looks like u welded the **** to the board.

 

I made the same statements above and I asked that same question about the SST and he doesn't seem to want to respond. He's content in dragging a good guys name through the mud for his own lack of knowledge and mistakes. Xenocron should not have to come on here and defend himself against idiots like this guy who shoots first blames others later.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GhostAccord &raquo;</TD></TR><TR><TD CLASS="quote">I made the same statements above and I asked that same question about the SST and he doesn't seem to want to respond. He's content in dragging a good guys name through the mud for his own lack of knowledge and mistakes. Xenocron should not have to come on here and defend himself against idiots like this guy who shoots first blames others later.</TD></TR></TABLE>


yea i didnt think he was going to come back after making an *** of himself.that was the first time ive ever seen a ecu chipped like that.

 

Well he could be a man and admit that he was totally wrong and make a public apology. But I guess it's easier to place blame and run. Coward

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GhostAccord &raquo;</TD></TR><TR><TD CLASS="quote">Well he could be a man and admit that he was totally wrong and make a public apology. But I guess it's easier to place blame and run. Coward </TD></TR></TABLE>


welll man u know how kids are nowdays blame everyone and everything but them selfs. for chris for at least trying.

 

TO : ZCCR-XSI .. dumb *** IDEA ,, ARE YOU ... I understand you should use a socket PERO NO ME SALIO DE LOS COJONES!!!!! wat DO YOU CARE.....

TO: GOSTACCORD... I said I ADMITED THAT PART OF THE PROBLEM WAS THAT I ACEPTED THE WRONG KIT......COWARD..

these statements COWARD , DUMB *** IDEA... are Exactly Y this FORUM GETS A BAD REP FROM TIME TO TIME!!!!
I was stating FACTS and SO was CRIS , we both got the point ACROSS , but WE DISAGREED , he IS no less than a MAN than I AM ..END OF STORY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MiamiEgGSr &raquo;</TD></TR><TR><TD CLASS="quote">these statements COWARD , DUMB *** IDEA... are Exactly Y this FORUM GETS A BAD REP FROM TIME TO TIME!!!! </TD></TR></TABLE>

Maybe so, but I think it may also have to do with guys like you. Coming on here pointing fingers and blaming folks who have done nothing but help the growth of the sport compact/import community. It's threads like this that probably drive some of the real technical guys away. I don't know any professional that wants to have there reputation drug around buy a nobody on a web forum?

It's cool that you are taking some (All of the blame) Next time you have a problem show some class and maturity and discuss things with the guy before you go public!

Cheers

 

[QUOTE=MiamiEgGSr]TO : ZCCR-XSI .. dumb *** IDEA ,, ARE YOU ... I understand you should use a socket PERO NO ME SALIO DE LOS COJONES!!!!! wat DO YOU CARE.....

i dont care! im wondering how u plan on tuning your **** if u cant get a emulator in there?and how doing a chip change?now that u got it straight in the board i know u got a very very good chance of lifting the pad when u try to desolder it.AND IF U UNDER STOOD U NEEDED A ZIF socket why didnt u use it?and your soldering looks like an 8 yo did it u need to take more pride in your work.

WTF&gt;&gt;PERO NO ME SALIO DE LOS COJONES

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GhostAccord &raquo;</TD></TR><TR><TD CLASS="quote">

Maybe so, but I think it may also have to do with guys like you. Coming on here pointing fingers and blaming folks who have done nothing but help the growth of the sport compact/import community. It's threads like this that probably drive some of the real technical guys away. I don't know any professional that wants to have there reputation drug around buy a nobody on a web forum?

It's cool that you are taking some (All of the blame) Next time you have a problem show some class and maturity and discuss things with the guy before you go public!

Cheers </TD></TR></TABLE>