Well the title pretty much explains it. I decided to go on a quest to learn how to tune my own ECU's using a stock ecu, a rom burner, turboedit, etc. I successfully chipped my stock ecu for practice. Then I bought a PS9 ecu (impossible to find) and chipped that. This was not successful. When I tried to remove my socket in the ps9 to try again, I desoldered all the pins but couldnt get the socket out. So I got all pissed off and ripped the socket out. Little did I know that I pulled out 4 or 5 "traces" (says the guy at radio shack).

Anyways, after I desoldered a few more things from the board to expose where the traces went (without further damaging it) I thought I would quit screwin with it, cuz I dont want to make it worse. I figure there has to be someone out there who I can pay to fix this ECU properly. PLEASE HELP ME!!! Thanks.

 

oooooooo....yeah dude, traces are a BITCH to fix. Wish I had some helpful info how to repair tracers, but I don't and I feel your pain.