So, how much timing advance and fuel is add usually with the mugen or spoon ECU programs ?

 

trust:
its a secret, i don't disect the programs, i can change vtec, rev limit, and sometimes disable sensors...but don't play with the ignition or mixture....

since these are copies of jdm program, i look at what they were design compare to what person has, and then we can go from there...

ie. mugen very rich, spoon is close to stock with more adv. timing...the list goes on...i try to match it to specific setup or let the person descide

 

What program would you recommend for a B18c1 w/:

ITR intake cam
Skunk2 manifold
64mm over bored TB
JDM ITR header
MSD 6 A ignition
JDM ITR pistons w/ spoon head gasket 11.8:1 cr

thanks for any info.
stock GSR valve springs


[Modified by TRuST, 12:05 PM 11/7/2001]

 

I would recommend you take it to a professional tunner and tune it on the dyno! But that's just my opinion.

 

Screamer:

who would u recomend as a good "tuner"..??
in the toronto area because,
im going turbo soon, and
yes i just had Adrian do some chipping for me


i can give u my future/current setup if u want
italocanadese@hotmail.com
Thanks.

 

I would recommend Paul, the same guy that tuned my ECU, just like I mentioned in the previous posts. If you want his number e-mail me rafal_bulgarski@yahoo.com

 

I would recommend Paul, the same guy that tuned my ECU, just like I mentioned in the previous posts. If you want his number e-mail me rafal_bulgarski@yahoo.com .