ebrake still engaged....
Thread Starter
Honda-Tech Member
Joined: Nov 2001
Posts: 2,004
Likes: 0
From: Germantown, MD, USA
ebrake still engaged....
hey, i was wondering if this has happened to anyone else, and what might be the fix for this? well when i disengage the ebrake, it is still applied. what could this possibly be? basically i have to keep pulling the brake and realeaseing about 5-6 times before it will disengage, any help would be appreciated! thanks a lot
Honda-Tech Member
Joined: Jan 2003
Posts: 8,132
Likes: 5
Re: ebrake still engaged.... (desipiE)
Maybe the cable is rusted & sticking?
Maybe the lever back on the caliper is rusted & sticking?
If the brakes drag with normal use, then look at caliper slide pins or maybe the pads are wedged tight in the caliper bracket?
You gotta look at some of that stuff for yourself; we can't see it from here.
Maybe the lever back on the caliper is rusted & sticking?
If the brakes drag with normal use, then look at caliper slide pins or maybe the pads are wedged tight in the caliper bracket?
You gotta look at some of that stuff for yourself; we can't see it from here.
Thread
Thread Starter
Forum
Replies
Last Post