Easy One
Thread Starter
Honda-Tech Member
Joined: May 2001
Posts: 60
Likes: 0
From: With Princess Toadstool in the other castle
What is the metal cable for that runs from the block or rocker cover to the frame? I thouhgt it was for gounding, but that's what the (-) on the battery is for. It is to help prevent degradation of the upper radiator hose or something?
[Modified by scn095, 5:47 PM 8/21/2001]
[Modified by scn095, 5:47 PM 8/21/2001]
and listen when they say "noise reduction"
You wouldn't believe how much engine noise is reduced from "ground straps"
You wouldn't believe how much engine noise is reduced from "ground straps"
Thread Starter
Honda-Tech Member
Joined: May 2001
Posts: 60
Likes: 0
From: With Princess Toadstool in the other castle
Thanks. The strap on my car was starting to fray, so I constructed a new one w/ plastic-coated steel cable. The thing is, the new cable is a lower gauge than the original strap. How probable is it that the new cable may be to small to handle the possible current load, and, if it fails, what may happen?
you can make your own or get one from a dealer- they are only a few bucks. I don't think I would use steel cable for wiring- it will work though. Just seems kind of ghetto to me.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: May 2001
Posts: 60
Likes: 0
From: With Princess Toadstool in the other castle
Thanks. I check the connection between the frame and the cable every time I open my hood. It seems to be okay so far, but I'll go to the dlrshp this weekend and get a new one.
Sam
Sam
Thread
Thread Starter
Forum
Replies
Last Post
ACTION JACTION
Engine Management and Tuning
2
Jul 2, 2011 07:14 AM
1BlackHatch
Audio / Security / Video
16
May 1, 2003 04:21 PM



