alright guys i intalled a 92 b18a1 motor into my 1990 civic dx and followed the swap guide for dx to zc but when i turn the key to start the main relay wont stop clicking and ecu wont stop flashing can someone help me out??

 

i had that happen to me i never fixed it it only happen once and i just put a starter kill on it.

 

ttt

 

hit me up i can help you out

 

so the start does NOT turn ???
but the relys clicks !?!
have you changed the hole wire !?!? in the car ??

 

I have ran into this problem before.

Make sure the main PGMFI ground is tight on the thermostat housing. Also, check all of the engine grounds.

Please be sure to keep us updated.

Good luck.

-kenji

 

i checked all the grounds they are fine ,,,, damn its pissin me off already

 

all the engine grounds are tight and good what else could it be guys?>?

 

im ready to take a 5lb hammer to the whole car!!!

 

try a starter killl swich its ghetto but worked on a cars that had the same problem.