Have a 99 Si Harness and am swapping in a non-vtec motor... Obviously the Si harness is OBD2 and the motor going in is a OBD1 Non-VTEC motor meaning I'll have to use a conversion harness for the ECU as well as change the pins on the distributor to make the OBD1 distributor fit with the OBD2 wire harness... Can anyone confirm if I have all the distributor pinouts correct for this plug change?


OBD2 Wire Color --> OBD1 Wire Color
Yellow/Green --> Yellow /Green
Light Blue --> Blue/Green
White --> Blue/Yellow
Yellow --> Orange
Black --> White
Green --> Green
Red --> White/Blue
Dark Blue --> Blue
Black/Yellow --> Black/Yellow
Black --> Black

That look right?