which direction for rods In B18A?
Thread Starter
Honda-Tech Member
Joined: Mar 2004
Posts: 8,159
Likes: 1
From: Roseville, CA
which direction for rods In B18A?
Should the side with the hole in the rod for the oil to travel to the rod bearing face to the front of the block(dipstick side) or to the rear? TIA!
Honda-Tech Member
Joined: Nov 2001
Posts: 2,424
Likes: 0
From: California
Re: which direction for rods In B18A? (hondaguyef)
Connecting rod oil hole must face the rear side of the engine. Also, the arrow on top of the pistons should be pointing towards the timing belt side, so this should tell you already about the rod oil hole (that's if the pistons are on correctly).
Hth.
Hth.
Thread Starter
Honda-Tech Member
Joined: Mar 2004
Posts: 8,159
Likes: 1
From: Roseville, CA
Re: which direction for rods In B18A? (3rdGteg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 3rdGteg »</TD></TR><TR><TD CLASS="quote">Connecting rod oil hole must face the rear side of the engine. Also, the arrow on top of the pistons should be pointing towards the timing belt side, so this should tell you already about the rod oil hole (that's if the pistons are on correctly).
Hth.</TD></TR></TABLE>
Did not come w/ pistons. thanks though
Hth.</TD></TR></TABLE>
Did not come w/ pistons. thanks though
Thread
Thread Starter
Forum
Replies
Last Post
OasU
Tech / Misc
2
Jun 13, 2012 01:33 PM
zenon8890
Honda Civic / Del Sol (1992 - 2000)
1
Sep 25, 2010 09:03 AM
mario_pic
Hybrid / Engine Swaps
3
Mar 15, 2010 01:35 PM
