Basically in ECU control just about everything works when you’re viewing the gauges.

I load uber and select the com ports and it connects but my readings are WAY off. For one it never reads boost. My vacuum gauge will read -20 and uber will read -3 or so. RPM will read 300 to 400. Actually non of the work correctly, they do fluctuate which tells me it is reading something.

I have tried new bins
Using 1.7 official
moates serial to USB converter.....
Tried on 2 laptops
Any Idea's

And before you post "you should of posted in pgmfi\uberdata forms" I rarely get a response from them, and if I do its about a 2 weeks later.

Thanks for your help

 

uberdata requires j12 to be in place...
make sure j12 is on your ecu

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mtber &raquo;</TD></TR><TR><TD CLASS="quote">uberdata requires j12 to be in place...
make sure j12 is on your ecu</TD></TR></TABLE>

thank you sir, this worked. you are the man!