I have a 94 civic si HB with a d16z6 engine that I am looking to build.
My goal is 300 horsepower. What I would like is so input on what setup I should use to reach this goal. Thank you

 

Would someone please leave a suggestion on what setup I could use on this build.
Thank you

 

There are different options on how you can do it. We mainly do piston and rod upgrade or you can go the full build with a sleeved block with new pistons and rods. Make sure you at least upgrade the valvetrain so it can handle higher RPMs. So you can take advantage of higher RPM boost.

With the right combination of turbo size and a good block setup, you should be able to reach 300hp.

 

you can use eagle rods, vitara pistons, zex cam, zex valvetrain and a nice size t3 or maybe even a t3/t4 with GOOD tuning to get there. not much is really needed. thats just a basic rundown.

 

Is there anyone that have a d-series with this type of build. If so I would like to know how you went about it and what you would do different if you were to do it over?

 

there are plenty of D16 builds on this forum. check the SEARCH function and you can find out the details on some members on here.

Wil
Exospeed Race Engines

 

check out turbod16.com tons and tons of people there running similar setups