I have a Sohc ZC with a ZC Transmission (2nd Gen Hydraulic) which needs replacement. I just wanted to know if a 2000 EX tranny would bolt right up, w/o any part replacements, such as axels, etc???

 

No one?

 

dnt quote me on this but i believe there are few differences between an obd2 tranny and a 2nd gen......sensors or something, i dont remember. like i said, i may be wrong though

 

Thanks, I'd imagine the sensors might be a little different, but that'll take me 2 seconds to fix, I'm worrying about bolting it all up and finding out the axels are different sizes, mounting brackets don't line up, or something to that nature. I appreciate your help however, and thank you for the positive input! Also, the 2000 ex tranny has the stronger Steel forks, correct? I'm pretty sure my 2nd gen ZC does, if anyone knows let me know so I can swap it now when it's apart, otherwise I'll have to reinvent the wheel =P

 

all d-series trannies will fit all d series motors

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cueballsi &raquo;</TD></TR><TR><TD CLASS="quote">all d-series trannies will fit all d series motors </TD></TR></TABLE>