crank and cam timing question???
04-17-2005, 03:34 PM
#1
Thread Starter
Join Date: May 2002
Location: ny
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
crank and cam timing question???
i was puttin on the clutch and i couldnt tighten the bolts without having the crankshaft spin... so i put a steel rod in the sprocket for the camshaft so it wouldnt spinn... so i was tightening the clutch bolts ( the bolts that go directly into the cranshaft) and the crankshaft moved but the camshaft didnt... i dont see how this is possible since the timing belt has grooves in it.. im pretty sure it didnt jump teeth on the sprocket.. my question is.. what could have happened to make the crank spin but no the camshaft.. any input would help thanks
04-17-2005, 03:41 PM
#2
Honda-Tech Member
Join Date: Mar 2001
Location: Hilo, Hawaii
Posts: 4,136
Likes: 0
Received 0 Likes
on
0 Posts
Re: crank and cam timing question??? (1hotintegra)
I would definitely check to see that the timing belt didn't jump some teeth on the cam gear. There are better ways of preventing the crank from turning.
Thread
Thread Starter
Forum
Replies
Last Post