crank bolt

Reply Subscribe

Thread Tools

Search this Thread

Feb 26, 2010 | 12:07 AM

tinyscivic

Thread Starter

Honda-Tech Member

Joined: Feb 2010

Posts: 25

Likes: 0

From: pueblo

crank bolt

k i am havin some trublle getting my crank bolt off that gose to the pully to get to the timeing belt any sugestion how to get it off

Feb 26, 2010 | 03:33 AM

hondamark35

Honda-Tech Member

Joined: Feb 2005

Posts: 4,235

Likes: 127

From: Mustard Belt

Re: crank bolt

penetrating oil, a large air impact and determination.

Feb 26, 2010 | 10:33 AM

BOOSTED RHD CRX

Honda-Tech Member

Joined: Sep 2009

Posts: 130

Likes: 0

From: phx, az

Re: crank bolt

stick a long strong screw driver in the fly wheel and take a breaker bar and grab the front end of ur car and push with ur foot while someone holds the socket on the nut so it doesnt strip the bolt.

Feb 26, 2010 | 11:35 AM

mouab18c1

Honda-Tech Member

iTrader: (5)

Joined: Aug 2006

Posts: 8,071

Likes: 5

From: Washington

Re: crank bolt

you will need a crank pulley tool to hold the pulley so that it doesnt spin when you try to loosen the bolt. A 12ft breaker bar does alot

Feb 26, 2010 | 01:33 PM

n/a2boost

Honda-Tech Member

Joined: Jan 2010

Posts: 230

Likes: 0

Re: crank bolt

i had the same problem with mine,lucky me mine was out of the car and on a stand. i just used a breaker bar with a jack handle on it and a pry bar and flywheels bolts to stop it from turning

Feb 26, 2010 | 06:01 PM

spidermancivic

Honda-Tech Member

Joined: Aug 2003

Posts: 1,045

Likes: 0

From: CA

Re: crank bolt

http://www.google.com/products/catal...d=0CBkQ8gIwAg#

and two breaker bars work for me everytime.

Feb 26, 2010 | 06:27 PM

redboost10

Honda-Tech Member

Joined: Sep 2003

Posts: 7,056

Likes: 0

Re: crank bolt

a little heat and a 1/2 drive impact gun works everytime.

but i admit the crank pulley tool thingy is pretty cool

crank bolt

crank bolt

Trending Topics