Couple Quick Questions
Thread Starter
Joined: Jun 2002
Posts: 422
Likes: 0
From: Calgary, BC, Canada
Couple Quick Questions
Pulled my head off today cuz my head gasket went south on my 
....so I have a ZC engine so I dont have a manual for them so I need to know what the torque specs are for my head bolts, and secondly do I need to get my head machined or are there tell-tale signs to let me know I need to machine it?
TIA
....so I have a ZC engine so I dont have a manual for them so I need to know what the torque specs are for my head bolts, and secondly do I need to get my head machined or are there tell-tale signs to let me know I need to machine it?TIA
Honda-Tech Member
Joined: Jan 2002
Posts: 2,267
Likes: 0
From: Sydney, Australia
Re: Couple Quick Questions (reXem)
dunno the torque specs so consider this a bump...
someone will know
with the head - did it overheat badly or just blow itself?
if it got too hot, then it could be slightly warped, you probly should take it to a shop and get them to check for warpage...
t..
someone will know
with the head - did it overheat badly or just blow itself?
if it got too hot, then it could be slightly warped, you probly should take it to a shop and get them to check for warpage...
t..
Thread
Thread Starter
Forum
Replies
Last Post