Is this correct?
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 1,622
Likes: 0
From: TJ, USA
Is this correct?
Well I recently had my ecu socketed/chipped with a tuning software, I'm just double checking that it has in fact been done, since I wasnt around at the time it was done, a reputable shop did it, but I still rather double check 
So, here's the picture, can someone confirm this? I just hadnt opened up the ECU prior to this, that's why, btw, it's a P28.
Also, I picked up this jumper harness for 0-1 obd conversion, what I'm wondering, is all the colorful wires, are they for a VAFC controller? Here's the pictures of that.
So, here's the picture, can someone confirm this? I just hadnt opened up the ECU prior to this, that's why, btw, it's a P28.Also, I picked up this jumper harness for 0-1 obd conversion, what I'm wondering, is all the colorful wires, are they for a VAFC controller? Here's the pictures of that.
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 1,622
Likes: 0
From: TJ, USA
cool, they both have 12 wires, being the jumper harness, and the vafc harness, that's why I assume that's what it is, but the jumper harness has a few more black wires I think.
If it is for VAFC, is there any other purpose for it, if I chose not to hook it up?
If it is for VAFC, is there any other purpose for it, if I chose not to hook it up?
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 1,622
Likes: 0
From: TJ, USA
Re: (Jim Truett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jim Truett »</TD></TR><TR><TD CLASS="quote">Those wires are for the sensors that are not present in your obd-0 harness. Didn't it come with instructions?</TD></TR></TABLE>
Really? I thought the plugs would take care of any necessariy wires, so I figured the colorful ones were just a splice in for vafc, it didnt come with instructions, I picked it up from a shop that had it laying around.
Really? I thought the plugs would take care of any necessariy wires, so I figured the colorful ones were just a splice in for vafc, it didnt come with instructions, I picked it up from a shop that had it laying around.
Member
Joined: Nov 2003
Posts: 2,274
Likes: 3
From: 92127
Re: (sLcREX)
But your chassis isn't pre-wired for the VTP, VTEC Spool valve, IAB control, and a couple others that I can't remember right now. I wish I could help, but I don't have any old instruction sheets laying around. Your best bet is to dig up an OBD-1 pinout and see where they go.
Thread Starter
Honda-Tech Member
Joined: Feb 2006
Posts: 1,622
Likes: 0
From: TJ, USA
Re: (Jim Truett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jim Truett »</TD></TR><TR><TD CLASS="quote">But your chassis isn't pre-wired for the VTP, VTEC Spool valve, IAB control, and a couple others that I can't remember right now. I wish I could help, but I don't have any old instruction sheets laying around. Your best bet is to dig up an OBD-1 pinout and see where they go.</TD></TR></TABLE>
ahh, so that's where those wires will go...you're right, makes sense
Thank you sir.
ahh, so that's where those wires will go...you're right, makes sense
Thank you sir.
Thread
Thread Starter
Forum
Replies
Last Post
DC2*Integra
Southern California (Sales)
8
Oct 7, 2007 10:17 AM