How can I get the color codes off the block. Is there any marking on the crank that can provide that information. When rebuilding a motor, Do you have to used Honda bearings due to the coating...I'm building a B18a and H22a


[Modified by D.SPECS, 12:59 PM 9/5/2002]

 

Come on, don't tell you guys don't know

 

take the number on the crank and match to the letter on the block for the bearing color.
if you have a manual you should know this. if you dont have one, get one.

 

you can also take the number to a honda parts counter and they will tell you what you need.

 

anyone experience bearing problem

 

im experience bearing problems...i went to honda and tried to get bearings for my h22...they all on backorder until 9/13...to top that off all the other parts i needed for my swap is on backorder.... which puts a delay on my swap which was supposed to be done already....daymn HONDA need to get off their lazy butts and make my shiet already!

 

I stock ACL's bearings for all Hondas for immediate delivery. Sorry about the cheap commercial

 

you need to take out your block to see which combination you have, YOU CAN NOT GO TO DEALERSHIP AND EXPECT THEM TO GIVE YOU THE RIGHT COLOR CODE. every block has a different combination. To avoid downtime, I suggest get ACL, they're standard size, and they will fit whichever color of bearings you need...

I have ACL and they are all within specs, if I had to wait for the damn dealer backorder list, I'd have still have no car by now ( 60 days BO for brown color)

stan

 

ive got 3 brown main bearing here now that Carland Acura sent me by mistake.