First off I am using a Zdyne ecu, my motor is a OBD0 B16 turbo at 15 psi. The problem I am having is that when I drive I get a code 1. If I throttle the gas while driving it is fine but if I drive at a constant speed (not under any boost) the code 1 error comes on and the car goes into limp mode. Before anyone replies with a change the O2 comment, I have - about 10 times and I have done so many searches that came up with nothing. I do have Bill at Zdyne helping me with this as well but I am hoping someone here has had a similar problem.

Please help! Thanks.

 

Anybody?

 

change your fuel filter, mine was doing that