I have a b16a2 in my 98 cx hatch and I swapped in the correct engine harness this weekend so I can finally pull the codes. I'm getting codes 10,6 and 7. I replaced the ect sensor and still have the code. I made sure the tips and map sensor weren't mixed up, which they aren't and I'm still getting a code for that. Finally I can't seem to find the correct plug for the iat. I know the wire colors are red/yellow green/black but I can't seem to find the plug. The harness I'm using is the stock cx harness, it's an automatic harness so I have a few extra wires. I ran the vtec wires already. Can somebody please help me. This is frustrating as he'll. Lol

 

The stock connector for the IAT is around the air box above the throttle body.