CEL code 7 and 2
Thread Starter
Joined: Aug 2006
Posts: 28
Likes: 0
From: Fort Nelson, B.C, Canada
CEL code 7 and 2
got code 7 and 2
7=Throttle Position (TP sensor)
2=O2B - Oxygen sensor #2
got a new O2 sensor orded but would code 7 be comein on because of the 02? the car idles up after start, it will start idle smoths out then a few seconds later the check engine light comes on and it idles up about 500rpm(up to almost 2grand)
is that cause its tryin to get more air to the 02 sensor??
If the tp sensor has nothin to go with the other code how would i go about fixing/finding out whats wrong there?
i check with a volt meter and the wire goin to the tp sensor has 5.4v goin to it...is that good or bad?
7=Throttle Position (TP sensor)
2=O2B - Oxygen sensor #2
got a new O2 sensor orded but would code 7 be comein on because of the 02? the car idles up after start, it will start idle smoths out then a few seconds later the check engine light comes on and it idles up about 500rpm(up to almost 2grand)
is that cause its tryin to get more air to the 02 sensor??
If the tp sensor has nothin to go with the other code how would i go about fixing/finding out whats wrong there?
i check with a volt meter and the wire goin to the tp sensor has 5.4v goin to it...is that good or bad?
Thread Starter
Joined: Aug 2006
Posts: 28
Likes: 0
From: Fort Nelson, B.C, Canada
Re: CEL code 7 and 2 (Eli Mac 67)
not 100% on how to change the volts goin to the tps...tryed puttin the meter on the wires i get a 5.4v reading then when i move the throttle from idle to WOT thing happins guessing need new sensor? or am i doin it wrong
Thread
Thread Starter
Forum
Replies
Last Post
RiTtEk401
Honda Civic / Del Sol (1992 - 2000)
8
Oct 4, 2011 02:52 AM
hatchedzex
Honda Civic / Del Sol (1992 - 2000)
4
May 24, 2004 05:12 PM
