ok on the y8 cam its got the word UP and 2 - marks directly across from each other at the 3 and 9 o clock position from the word UP. To set cam timing the Up needs to be in the 12 o clock position and the 2 - marks line up with the 2 marks on the inside of the timing cover...or the surface of the head? its about a quarter inch if not a little more in turning distance between the 2. Thanks

 

bump

 

??? all i need to know if i need to line the cam marks up with head surface or makrs on timing cover.......

 

head surface

 

The "up" mark will appear to be tilted forward slightly and the line should be parralell w/ the head surface.

Phil