Ok I am building my 2000 Civic SI to as close or over 450whp as I can. I have ordered a B18c motor to build for my SI. But I am lost on the Tranny this is what I have looked into, but please help me out and get me on track for a good strong solid tranny. I aint good on building transmissions. Thanks

B&M Short Shifter
Quaife LSD
ACT Clutch A14-XTSS
Enjo Driveshaft Stage 3
ACT StreetLite Flywheel
Enjo Transmission Mounts

What about bearings and syncros? Would those be fine, if not what brand should I get and where can I get them? Thanks

 

Quaife has a fantastic reputation and a lifetime warranty. GearSpeed offers carbon-coated synchros to improve shifting. I'd go with OEM bearings.

 

quaife all the way. All so i think honda sell's the carbon - coated synchros now to.
and make sure you use good tranny fuild that will help alot.

 

Ok thanks, what about the short shifter, flywheel, and all of that I have listed is that good? Then what about these Carbon coated synchros, everyone says Gearspeed.com but when I put that in nothing really comes up.

 

try and search for gearspeed on the board and someone will have the link.as far as the clutch and fly wheel it's up to you act is a good brand. i run clutch masters in my setup.

 

http://www.gear-speed.com

 

Thanks for everyones help, is there anything else besides what is listed below I should get to have my transmission holding 450whp and more in the future? Thanks again

B&M Short Shifter
Quaife LSD
ACT Clutch A14-XTSS
Enjo Driveshaft Stage 3
ACT StreetLite Flywheel
GearSpeed Carbon Coated Synchros