Bending dumptube
Thread Starter
Member
Joined: Aug 2003
Posts: 1,782
Likes: 1
From: Ohio, USA
Bending dumptube
My dump tube almost work, but I need to bent it a little bit (I have a drag dumptube) on my revhard manifold setup. It will also help divert the gas totally vertical and not spray carbon deposits on the radiator.
How do I bend the tube in a home garage?
How do I bend the tube in a home garage?
RTFM
Joined: Jun 2002
Posts: 7,267
Likes: 4
From: Conroe, TX
no way that i know of, specailly if it is stainless steel.
if you got something you can brace it with and something to stick in it to bend you can try heating it up til its reddish and bend it that way...
if you got something you can brace it with and something to stick in it to bend you can try heating it up til its reddish and bend it that way...
Honda-Tech Member
Joined: Mar 2005
Posts: 1,146
Likes: 3
From: Chambersburg, Pa, USA
Re: (adseguy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by adseguy »</TD></TR><TR><TD CLASS="quote">or buy Stainless steel flex tubing and route it anyway you want to. You can find it at JCwhitney in the exhaust section</TD></TR></TABLE>
That would be my recommendation
That would be my recommendation
Thread
Thread Starter
Forum
Replies
Last Post
HT Chaplain
Welding / Fabrication
1
Jan 25, 2008 06:23 PM
