is the bore the only diffrence between the b20b\z and b18b block? will sleeves designed for b18 fit in the b20?

 

b18 bore is 81mm, and b20 bore is 84mm. If I were going to sleeve it, I'd do a search and find information on Benson sleeves, I'm pretty sure they have an application to fit the b20.

 

can i buy sleevekits from benson, and install tem myself? is the bore the only diffrence between the b18b and b20b\z block?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mh &raquo;</TD></TR><TR><TD CLASS="quote">can i buy sleevekits from benson, and install tem myself?</TD></TR></TABLE>

NO, unless you own a machine shop

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mh &raquo;</TD></TR><TR><TD CLASS="quote">is the bore the only diffrence between the b18b and b20b\z block?</TD></TR></TABLE>

that is the one major differance yes, but just buy sleeves for your block makes it easier down the road in case there are any minor stupid differances

 

i don't own one, there is one at work. so i'm not worryed about the machining.

just need a sett of sleeves. besides darton i cant find anyone that supplies kits that are ment to be installed by buyer. and they only have b18 sleeves....

 

i have a set of sleeves for sale click my sig. Thye HAVE to be installed by a machine shop. In fact you can buy my motor and the sleeves

 

how much for the sleeves? AEBS, rigth? I'll ned some specs on them, tensile strengt....?