B16B head on B16A2 block....
Thread Starter
Joined: Mar 2002
Posts: 450
Likes: 0
From: NOVA, USA
B16B head on B16A2 block....
Has anyone done or know anyone that put a b16b head on a b16a2 block? If it's possible I know I have to change the heads and rods and other stuff on the block. I'm not looking to do a swap in the future but I hope to give it some boost 
Honda-Tech Member
Joined: Oct 2000
Posts: 4,490
Likes: 2
From: GTA, ON, Canada
Re: B16B head on B16A2 block.... (RedSi99)
B16B is a ported & polished factory B16a head it will fit your B16a (but not worth the money). B16B shares the head with other B16As (all other generations), B18c (JDM) and B18c5, B16B, B17A. B16A heads have PR3 stamp on them.
block found on the B16B is taller (its a B18C block) so that rods and crank is different therefore unuseable on the B16A.
piston can be used but the c/r will go to about 11:1 area (which is not needed for boost)
[Modified by eg6ajk, 5:31 PM 1/8/2003]
block found on the B16B is taller (its a B18C block) so that rods and crank is different therefore unuseable on the B16A.
piston can be used but the c/r will go to about 11:1 area (which is not needed for boost)
[Modified by eg6ajk, 5:31 PM 1/8/2003]
Thread
Thread Starter
Forum
Replies
Last Post
