B16a ECU Throwin Codes, help...
Thread Starter
Honda-Tech Member
Joined: Dec 2001
Posts: 3,712
Likes: 0
From: https://t.me/pump_upp
B16a ECU Throwin Codes, help...
I just got finished doing the coolant bypass, and almost regretting it now. I started it up, and it had BAD idle problems. I found the problem, a vacuum line...and quickly fixed. The ECU is now blinking 5 times quickly together. Anyone know what code this is? I don't have a B16 manual. After doing bypass, should I disconnect the IACV, or just leave it plugged in? Also, what kind of vacuum leaks are going to be left over now, and might they be causing the code?
jB
jB
Thread Starter
Honda-Tech Member
Joined: Dec 2001
Posts: 3,712
Likes: 0
From: https://t.me/pump_upp
Re: B16a ECU Throwin Codes, help... (Jared)
Yeah, I didn't have a couple of vacuum lines plugged in. I got the correct hoses on the right nipples, and everything is flowing fine 
jB
jB
Thread
Thread Starter
Forum
Replies
Last Post
kacheoh
Honda Civic / Del Sol (1992 - 2000)
6
Sep 19, 2009 11:54 PM
