Hey, I got a b16a2 swap in my 93 coupe and I cant get it to pass emissions. I had a P2T hooked up to it without any of the OBD2 sensors hooked up and it failed badly. Here's the results:

High Speed RPM = 2389
HC = 1477 Limit = 180
CO= 7.59 Limit= 1.20

Low Speed RPM = 775
HC= 6149! Limit= 180
CO=1.79 Limit= 1.20

So today I tried putting my stock P28 on it and as soon as the guy hooked up the exhaust reader, I could see it wasn't going to do much better(7000 HC). What do you guys think I should do to make it pass? I was thinking about getting a JDM P30 but I wonder if it being a JDM ecu, it will just do worse. So please let me know what you guys think. I need to get this thing passed asap! Any input welcome!


Modified by Kyoh at 4:34 PM 6/10/2008


Modified by Kyoh at 5:41 PM 6/10/2008