ok i got a b16a1 that came out of a crx si and im putting it in a 90 dx hatch, what wiring needs to be done? people have been telling me a few different things, one person said since it was in the crx that i didnt have to mess with the engine harness and i just had to run the resistor box to the ecu, and run the vtec wires, im not doing the wiring myself but i kinda wanted to know what was going on and what actually had to be done before i pay an arm and a leg for something that i dont really know whats going on, i dont mess with wiring so thats why im not doin it myself, any help would be great, thanks

 

Well if it a DX then you prob have DPFI. You need to switch to MPFI. Also you will have to Wire the VTEC via a PRM Switch or a Chipped P28. There are a lot of writeups on this subject...http://tech.hybridgarage.com/tech/4g...ex.html...Matt