Anything else I should do to the block machine wise?
Thread Starter
Mustang Sally
Joined: Jan 2002
Posts: 6,092
Likes: 0
From: Midwest
Anything else I should do to the block machine wise?
Heres what she's got going so far for her...
Align hone Mains
Align hone and prep rods
Bore .020 over
Hone
Decking the block
Hot tank
Head:
Mill the head
Hot tank
The car is a 95GSR with 120k miles and I'm putting in Wiseco 9:1cr 81.5mm pistons and Eagle H-Beams and I'll be boosting at about 12psi with a vortech on stock sleeves, hopefully looking for 260-300whp after everything is all said and done.
Valvetrain is completely stock.
Align hone Mains
Align hone and prep rods
Bore .020 over
Hone
Decking the block
Hot tank
Head:
Mill the head
Hot tank
The car is a 95GSR with 120k miles and I'm putting in Wiseco 9:1cr 81.5mm pistons and Eagle H-Beams and I'll be boosting at about 12psi with a vortech on stock sleeves, hopefully looking for 260-300whp after everything is all said and done.
Valvetrain is completely stock.
Thread
Thread Starter
Forum
Replies
Last Post
es.roadster
All Motor / Naturally Aspirated
1
Aug 18, 2010 10:21 PM
Propulsion
Tech / Misc
10
Aug 27, 2002 02:18 AM
