I was looking at this for a N/A LS/VTEC stroker motor and thought this would be good. I could run a 95mm stroke with a 85mm bore for 2.2l with a R/S ratio of 1.6 .

Here's the info on it:

http://www.erlperformance.com/...1.pdf

A local shop is a dealer, sells quite a few of them, and they haven't had any problems with them, but I've never heard of them before.

So, anyone on H-T used one of these? I'm especially interested in anyone who's used the Superdeck 2 version with the deck plate.

 

The only word I've heard about them is "BEST". Hope that tells you something.

 

my buddie is a ERL dealer, never had any problems from there blocks, great blocks!!

 

The absolute best you can get. You will not be dissatisfied at all!
As far as I know, no one else will do a deckplate motor now except ERL. I know for sure GE stopped making theirs.