Anyone with a Helms for a G2 Integra...
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 281
Likes: 0
From: Wgtn, NZ, NZ
Re: Anyone with a Helms for a G2 Integra... (Teken)
Good to see you back Teken!
Here's the deal, after being a dumbass
and ripping out some wires which I initially thought was for the spot lights.. my horn didn't work. I have found the positive cable that goes to the horn and tested it by hooking it up to the horn. It works, but then I hooked it up again... no sign of a beep. Went thru all my fuses and they were fine. Now I'm stumped 
, is there an external relay for the horn? I think a horn wiring diagram for a DA-6 is what I need.
BTW - did you know you can adjust the pitch of the stock horn by turning a small screw behind it... i just found out after toying around with it. I guess some benefit came from this dumbass experience.
Here's the deal, after being a dumbass
and ripping out some wires which I initially thought was for the spot lights.. my horn didn't work. I have found the positive cable that goes to the horn and tested it by hooking it up to the horn. It works, but then I hooked it up again... no sign of a beep. Went thru all my fuses and they were fine. Now I'm stumped , is there an external relay for the horn? I think a horn wiring diagram for a DA-6 is what I need. BTW - did you know you can adjust the pitch of the stock horn by turning a small screw behind it... i just found out after toying around with it. I guess some benefit came from this dumbass experience.
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 281
Likes: 0
From: Wgtn, NZ, NZ
Re: Anyone with a Helms for a G2 Integra... (Teken)
I presume the fuse box you're talking about is located inside the car and not the one under the bonnet. Anyway I'll go home and check it out and let you know how i go... thanks again Tek!
didn't know USDM G2s had cruise control.
Lyonel - who can't pull himself off Honda-Tech at work
didn't know USDM G2s had cruise control.Lyonel - who can't pull himself off Honda-Tech at work
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 281
Likes: 0
From: Wgtn, NZ, NZ
Re: Anyone with a Helms for a G2 Integra... (Teken)
Ok here are the pics as promised. If you look closely you can see the words UP, DOWN inscribed next to the screw adjustment 
http://www.lyonel.8m.com/post/P0001833.jpg
http://www.lyonel.8m.com/post/P0001834.jpg
http://www.lyonel.8m.com/post/P0001835.jpg
http://www.lyonel.8m.com/post/P0001833.jpg
http://www.lyonel.8m.com/post/P0001834.jpg
http://www.lyonel.8m.com/post/P0001835.jpg
Trending Topics
Honda-Tech Member
Joined: Mar 2001
Posts: 1,507
Likes: 0
From: Houston, TEXAS, USA
Re: Anyone with a Helms for a G2 Integra... (Lyonel)
Cool information on the horn screw, never noticed that before when I've had the front bumper off... Gotta be like Teken on this one and try it out. Hey, if you set one horn High and the other one low, with a special circuit in between, you could have a cool siren thing going on..... .
On the wiring, Does anyone know if the US/Canada wiring is different than the Japanese Domestics and European/Austrailian models? Just curious because I know even within the First series of G2 integras (90-91) things are not interchangeable between model years- Like engine bay fan brackets and some electric items.
.On the wiring, Does anyone know if the US/Canada wiring is different than the Japanese Domestics and European/Austrailian models? Just curious because I know even within the First series of G2 integras (90-91) things are not interchangeable between model years- Like engine bay fan brackets and some electric items.
