alighning clutch?
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 899
Likes: 0
From: sactown, cali, usa
Re: alighning clutch? (kur0ryu)
im puttng a used clutch in for a friend. so theres no way i can buy one. i tried calling honda and they say they dont have the tool even if you buy the clutch from them.
Joined: May 2004
Posts: 5
Likes: 0
From: riverside, ca, usa
Re: alighning clutch? (DubyaAye)
you can just use your eye!!!! 
...... its very simple to align the disk with sheer vision. if you cant get it on right there are places every where that sell the universal alignment tool. they are on ebay too. http://cgi.ebay.com/ebaymotors...33730
...... its very simple to align the disk with sheer vision. if you cant get it on right there are places every where that sell the universal alignment tool. they are on ebay too. http://cgi.ebay.com/ebaymotors...33730
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 899
Likes: 0
From: sactown, cali, usa
Re: alighning clutch? (4drGSRSLPR)
damn i need it by today. i just call my bro. up he said that i can try and get some piece from a broken b16 tranny i have. is that true.
Trending Topics
Junior Member
Joined: Apr 2004
Posts: 389
Likes: 0
From: Northern, VA, USA
Re: alighning clutch? (DubyaAye)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DubyaAye »</TD></TR><TR><TD CLASS="quote">damn i need it by today. i just call my bro. up he said that i can try and get some piece from a broken b16 tranny i have. is that true.</TD></TR></TABLE>
if you have drive shaft off the broken tranny that will work better than anything.
if you have drive shaft off the broken tranny that will work better than anything.
Honda-Tech Member
Joined: Jun 2002
Posts: 5,527
Likes: 3
From: Where the Hell is 29 Palms
Re: (dub_c)
here's a site: for the clutch aligning tool
http://clutchcityonline.com/Me...8-026
$4.00
**** the powerbuilt pos made in taiwan ****
Modified by sleeperciv at 8:11 PM 5/22/2004
http://clutchcityonline.com/Me...8-026
$4.00
**** the powerbuilt pos made in taiwan ****
Modified by sleeperciv at 8:11 PM 5/22/2004
Member
Joined: Dec 2002
Posts: 1,740
Likes: 2
From: Tampa, Fl, US
put the disc and flywheel on but down tighten them down all the way so the clutch disc can move around in between the pressure plate and flywheel. wobble the tranny on thereand make sure the spline gets thru the disc which you will obviously be able to feel. tighten a couple bolts on the tranny to hold it on. then thru the starter hole tighten each 10mm clutch bolt to the correct specs and rotate the crank so u can do it in the correct sequence also. 
this is a last resort if for some odd reason u cant find an alignment tool
this is a last resort if for some odd reason u cant find an alignment tool
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 899
Likes: 0
From: sactown, cali, usa
Re: alighning clutch? (kur0ryu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kur0ryu »</TD></TR><TR><TD CLASS="quote">
if you have drive shaft off the broken tranny that will work better than anything. </TD></TR></TABLE>with the shaft, tranny fit in like a glove.
if you have drive shaft off the broken tranny that will work better than anything. </TD></TR></TABLE>with the shaft, tranny fit in like a glove.
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 899
Likes: 0
From: sactown, cali, usa
Re: (AL ASPIRATED)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AL ASPIRATED »</TD></TR><TR><TD CLASS="quote">kragen</TD></TR></TABLE>called around most of the auto parts store and none of them had it, i even call the performance shop but with no luck. luckily i have a broken tranny that i can use the shaft.
Trial User
Joined: May 2003
Posts: 2,785
Likes: 0
From: Bay Area, CA, USA
Re: (DubyaAye)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DubyaAye »</TD></TR><TR><TD CLASS="quote">called around most of the auto parts store and none of them had it, i even call the performance shop but with no luck. luckily i have a broken tranny that i can use the shaft.
</TD></TR></TABLE>
hrmm did kragen really stop renting them out?
i noe they did before
</TD></TR></TABLE>
hrmm did kragen really stop renting them out?
i noe they did before
Thread
Thread Starter
Forum
Replies
Last Post
tacchan
Honda Civic / Del Sol (1992 - 2000)
26
Mar 17, 2010 11:25 AM
badpootie
Honda Civic / Del Sol (1992 - 2000)
19
Jun 20, 2005 09:47 AM
