nevermind i figured it out

 

what did u figure out?

 

so is the gauge type uego compatible with hondata?

 

so is it???

 

No it's not

 

are you sure? I heard it work perfectly fine with Hondata.

I'm gonna tune my car with Hondata and AEM EUGO on the Dyno.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B00ST2nR &raquo;</TD></TR><TR><TD CLASS="quote">are you sure? I heard it work perfectly fine with Hondata.

I'm gonna tune my car with Hondata and AEM EUGO on the Dyno.</TD></TR></TABLE>

 

NO IT WILL NOT WORK...it's voltages are out of the range the Honda ecu can use.

 

But the UEGO is a Stand Alone unit. You plug it into an O2 bung and it reads the Wideband so you can fine tune it.

I don't see why it can't be used for tuning with Hondata. The UEGO will only be on my car when I'm tuning it. After its tuned with the Hondata, the UEGO will be off.

 

Do you have the gauge or the UEGO controller.

 

Thats fine a long as you are not tying to integrate it so that you can see the readings in the Hondata software. If you are not trying to interface the 2, then ANY wideband that has it's own display will work.

 

THIS IS HOW YOU FIX THE PROBLEM.
the aem wideband unit does not work with hondata.......unless
you feel like making one of these..
http://www.angelfire.com/elect...A.htm

 

Just looked this over myself as well as some of the others in the electronics division here and this will work. You have to change the calibration in the Hondata, but thats it. Also if you haven't bought a UEGO controller yet. You can use the UEGO gauge(with built in controller) we have and it will work with the Hondata.

 

Seeing this just makes me glad I got an AEM EMS.. It can use any wideband setup on the market..


Modified by tgreaves at 9:52 AM 8/11/2004

 

Does the gauge uego work with it or do you need the voltage splitter

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboTeG4 &raquo;</TD></TR><TR><TD CLASS="quote">Does the gauge uego work with it or do you need the voltage splitter </TD></TR></TABLE>

Does the uego work with what??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmturbosol &raquo;</TD></TR><TR><TD CLASS="quote">THIS IS HOW YOU FIX THE PROBLEM.
the aem wideband unit does not work with hondata.......unless
you feel like making one of these..
http://www.angelfire.com/elect...A.htm</TD></TR></TABLE>
Well a lot of people are wondering if this fix works with the guage, its been posted over and over with absolutly no answers but QuaK answers

 

 

 

rfegsaefhsfgsf