ABS light

Reply Subscribe

Thread Tools

Search this Thread

Mar 21, 2003 | 04:03 PM

avs

Thread Starter

Junior Member

Joined: Nov 2001

Posts: 191

Likes: 0

From: MD, USA

ABS light

My ABS light's on for my Integra. I got a 4-8 code which is the rearwheel driver side wheel speed sensor. What do i need to replace ? The wheelbearing and the sensor or just the sensor alone? and how much would that run me.

[Modified by avs, 8:03 PM 3/21/2003]

Mar 21, 2003 | 04:37 PM

Chiovnidca

Honda-Tech Member

Joined: Apr 2002

Posts: 7,574

Likes: 6

From: Cincinnati,, Oh

Re: ABS light (avs)

Quote:

You may want to check the resistance of the sensor to be sure that is the problem. I don't know the spec on those.

Mar 21, 2003 | 08:53 PM

avs

Thread Starter

Junior Member

Joined: Nov 2001

Posts: 191

Likes: 0

From: MD, USA

Re: ABS light (TurboD16Chiovnidca)

do u have a diagram or pic of the sensor? if the wire is shot do i need to replace the line? what kind of work is involve?

Mar 22, 2003 | 03:29 AM

Chiovnidca

Honda-Tech Member

Joined: Apr 2002

Posts: 7,574

Likes: 6

From: Cincinnati,, Oh

Re: ABS light (avs)

Quote:

do u have a diagram or pic of the sensor? if the wire is shot do i need to replace the line? what kind of work is involve?

No, I dont have a pic. Just follow the wires till you get to a connector and measure it there.

Mar 22, 2003 | 05:04 AM

VTI_VTEC

Joined: Mar 2002

Posts: 29

Likes: 0

From: Scotland

Re: ABS light (avs)

Quote:

do u have a diagram or pic of the sensor? if the wire is shot do i need to replace the line? what kind of work is involve?

as far as i know the resistance should be about 1000 oham ,it was that not hard to change on a eg9 ,just trace the the wire from the speed sensor to a plug and disconnected and install a new speed sensor

kenny