hello all well i have had my 92 cx hatchie for many moons now and i installed all the goodies all power windows locks and mirrors all oem with a complete harness out of a 95 ex so everything would plug right in and my car would be vtec friendly all plug n play and i did a complete gsr disc conversion and i finally just got a b16a swaped into it well my problems are 2 one i think my brake booster is done cause i had an irratic idle with my SOHC after i installed the disc conversion and now that i have a b16 it still does it mildly at times i also notice that the jdm b16 has no place for the map sensor on the throttle body so i got it running piggy back off the vaccum canister well besides all that i noticed a knocking sound after 2 weeks of the swap it got worse when i traded my rota circuit 8s for 2000 si rims (with cash on top hehehe) it knocks way louder and now it will knock when i turn only when it is cold now i know what u are thinking it must be axels well i just replaced both sides BRAND NEW OEM so yeah i bought them for nothing but now i have a AutoZone life time guarntee so when i mess them up from racing so i am thinking it could only be the bearing now it knocks at 20-40mph and the steering wheel will shake from 45-65 mph so i hope some people have feed back