3pin to 16 pin obd2
Thread Starter
Trial User
Joined: Mar 2014
Posts: 1
Likes: 0
3pin to 16 pin obd2
Ok so i got a 99th Honda HR-V with d16w1 and i don't have a 16th pin obd2.I only got the 3 pin and 2 pin connectors.Is the car odb1 or obd2 ?
The question is can i rewire my harness so i can have that 16pin connector or no ? I should probably check what kind of ecu i got aswell ?
The question is can i rewire my harness so i can have that 16pin connector or no ? I should probably check what kind of ecu i got aswell ?
Honda-Tech Member
Joined: Jul 2006
Posts: 2,817
Likes: 5
From: Kansas
Re: 3pin to 16 pin obd2
The Data Link Connector is on the passenger side of the center console, close to the foot well.
OBD2 standard requires a DLC within a certain distance of the steering wheel. Under the dash on the driver side works for most, but they don't have to put it in that spot on every car.
OBD2 standard requires a DLC within a certain distance of the steering wheel. Under the dash on the driver side works for most, but they don't have to put it in that spot on every car.
Thread
Thread Starter
Forum
Replies
Last Post