I have 2 problems, the first is that a few of the lights behind my gauges aren't lighting up. I removed the gauge cluster and didn't see any bulbs. The other problem is I can't get the alarm to turn on. When I replaced the battery the alarm wouldn't react to the key pad so I disabled the alarm by unlocking the drivers door 2x in a row, but now I can't get it to turn back on. how I can get it to rearm?

 

i would find out what kind of alarm it is (make and specific model) and google how to re arm that specific alarm...you may have to perform a re learn procedure because you replaced the battery.. the alarm module and key pad need to recognize each other.... because you replaced the battery sometimes things like this happen... good luck!

 

also.... check the fuses for the alarm unit

 

I have a factory alarm, I will check the fuses.
Thank you