1st-gen JDM B16A Head - Clean & Disassembled - San Diego
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: San Diego, CA, USA
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
1st-gen JDM B16A Head - Clean & Disassembled - San Diego
So I worked on this 1st-gen stock B16A head for the experience in an auto skills course, but I never assembled it and I don't have a Honda anymore, so here it is for sale.
The head has been disassembled, cleaned, exhaust valve seats cut with 3 angle job, all valves have been ground.
All parts are clean and dry and appropriately bagged in ziplocks.
I believe that basically every part is here, EXCEPT THE STOCK CAM GEARS.
ebay B16A head gasket set and used OEM Honda timing belt are included.
Valve cover has been cut to expose the cam gears, for adjustable cam gears.
Plenty of material left to resurface this head, assemble, add short block, and haul *** drive!
LOOKING FOR $240 OBO -- PRICE DROP!
The head has been disassembled, cleaned, exhaust valve seats cut with 3 angle job, all valves have been ground.
All parts are clean and dry and appropriately bagged in ziplocks.
I believe that basically every part is here, EXCEPT THE STOCK CAM GEARS.
ebay B16A head gasket set and used OEM Honda timing belt are included.
Valve cover has been cut to expose the cam gears, for adjustable cam gears.
Plenty of material left to resurface this head, assemble, add short block, and haul *** drive!
LOOKING FOR $240 OBO -- PRICE DROP!
Last edited by KFBhonda; 06-09-2014 at 10:31 AM. Reason: PRICE DROP!
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: San Diego, CA, USA
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1st-gen JDM B16A Head - Clean & Disassembled - San Diego
damn u guys are on top of it, unlike me. haha yeah from the future.
and guess what, turbohatch96y7: i am selling a b16a head. not a b16a engine. you add the bottom end and build the engine and you are telling me that b16a head-ed engines out there don't haul ***?
and guess what, turbohatch96y7: i am selling a b16a head. not a b16a engine. you add the bottom end and build the engine and you are telling me that b16a head-ed engines out there don't haul ***?
#6
Honda-Tech Member
iTrader: (116)
Join Date: Nov 2002
Location: Orange County, CA, USA
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1st-gen JDM B16A Head - Clean & Disassembled - San Diego
Hauling *** is relative. Stock b16 head on a built block then boosted can be safe for around 400hp. When my honda made 392whp i was the slowest car out of my 7 v8 friends. Although your head is nice and looks like u did a good job i would not file it under the "hauling ***" category.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post