[Ennis_D]

iTrader: (1)

For....? 16" CPR's? I have NOTHING to ride on when my wheels sell, thats why.

Got the z6 TB cleaned, primed, and painted after work. Starter has been cleaned and primed and will be painted tomorrow!

[Ennis_D]

iTrader: (1)

z6 TB dry, waiting on starter to dry:

92teginsc

lookin good and minty freashhh

B16CRXT

Trav, here is another resource to check out about our transmissions. I'm driving to Greensboro tomorrow to pick up a 90 si tranny for $120. Gonna do the differential test when I get there.

For some reason, this article says to put the tranny into 5th; not 1st...
http://crxcommunity.com/viewtopic.php?t=246

another good rpm/mph calculator link
http://crx.honda-perf.org/math/index.html

[Ennis_D]

iTrader: (1)

Thats and interesting link there Chris. Give it a shot both ways and see what it gives you. Could be double insurance for you! LMK what happens!

Pressure-washing and HOPEFULLY painting block tomorrow along with other odds and ends! Parts from Majestic were not left at home as they required signature confim

THE GUY

Axle #1 has new bracketswelded on and gears and locker in, axle #2 almost done welding, gears and locker in. also have to weld the truss on. Can't wait to get them under the jeep, 25mpg and can pull a house is my kind of toy. Also 3 link rear suspension will be on its way here come thursday. So damn excited, i'll be one of the first people to get the kit before it becomes a retail part.

Now I have to sell my swampers so I can run my bfg's abd get some cash to buy 38's or 40's. Also starting my exo-cage in a week or two. This toy is so much more fun than the db was, I miss curves but not that much. Haha

92teginsc

what? that db was the ****. i should have took it for a drive b4 that ricer pissed it away.

[Ennis_D]

iTrader: (1)

Racing Harts sold on eBay. Now lets see if the buyer is able to actually pay $1250...

B16CRXT

Since they give you a mathematical equation to figure out the amount of turns the diff should make after you rotate the input shaft 10 times, you could really put it into any gear. I did pick up the tranny this morning. It spun easily when in 1st but I had trouble getting a consistent result from that method, but I was able to get my mark right around the 9 o'clock position a couple of times after spinning the shaft 10 times. When I get home with it later, I'll clean it up and try to see that PL3 stamp better. It looked like the bottom half was blank when I was looking at it up there. the gold sticker on the case also says L3-2XXXXX so its a 90-91 based on that, but I forgot to look for input shaft grooves. I'll go look at that in a few as well. If nothing else, I got a tranny off a running motor and the guy claims it is in good shape. He also threw in a starter which wasn't "that old" and he had a cargo cover for my hatch that he sold me for $19. Think I made out pretty good for $139

[Ennis_D]

iTrader: (1)

Here are some random shots I have taken with mom's d3100 since cleaning the motor. Just got the block sprayed.





Before (after EXTENSIVE CLEANING!)


Hit with simple green and pressure washer x2 today. Of course primed and painted:




And got bored while waiting on paint to dry so I got the dremel out. Still need to smoot it over 100%:



Put some funky paint on the dizzy cap. Will post in a bit for input!

92teginsc

damn you. quit postin these pics or i will kiil you. you wanna do mine? i have moneyz!

92teginsc

and gimme a price on that hood and trunk. k thanx bye!

[Ennis_D]

iTrader: (1)

I will gladly do yours. You buy supplies, I have pressure washer and simple green, you bring beer and we call it even!

Hood and trunk, for you (and anyone else on here), MEH....$500. $275 for trunk, $225 for hood.

92teginsc

ok lemme know when i can bring it over. asap. thanx man.

[Ennis_D]

iTrader: (1)

Looks like I may have a buyer for the hood and trunk come Wednesday. We'll see!

[Ennis_D]

iTrader: (1)

Clemson win, Duke win = WIN

[Ennis_D]

iTrader: (1)

Had some new "parts" come in:



Emblems for trunk once back from body shop, clock block as I cannot get a clock to work since swapping the dash in the 4dr.

92teginsc

putting honda badges on the teg?

92teginsc

and to hell with duke! and clemson lost unless youre talking about baseball.

THE GUY

Ugh, still at work. Went in a hour early and gave to stay 4 late, apparently my seniority doesn't mean **** to my manager. I'm supposed to be able to make the guys under me stay in my place if I dont want to, but since they are all **** ups and constantly break **** and/or don't show up to work i'm forced to do it. I'm really tired of busting my *** for a company just to get ahead of the pack and then get **** on and treated like a damn slave. Only for the retards to be let off easy and make almoat what I do and do 1/10th the work. Fvck corporations, im going to start selling crack and heroin and be my own boss. Haha /rant

B16CRXT

Damn, that sucks Jon. At least you know they trust you to get the job done right. Eventually, they will have to start kissing your shoes...

Anyone got a line on a 4.25fd out of an L3 tranny?

[Ennis_D]

iTrader: (1)

Let me guess, UNC bandwagon fan are you? I was talking baseball.

Yes, badges for the DB

92teginsc

bandwagon????? you have me mixed up with somebody else i guess. i have been a tarheel since the early 80s and im the senior citizen of this here thread so youre just gna have to trust me on that one bud.

92teginsc

orrrrr i could just show you my entire wardrobe of unc gear i have. lol.

THE GUY

Doubt it, Brandy (buddy of mine at work) is a lead tech like me, been there 13 years and still gets **** on daily. He's the best one there honestly and I just learned he only makes $1.85hr more than me. Thats all I have to look forward to, i'd have ti get a T&D degree or a AD in buisness to be a manager since they changed the rules.

I just got the highest classification you can get in a plant for my job and got lied to as far as pay rate. And i'm yet again the first person to ever get it in less than 18 months that's ever worked there. It's just like magna, except I drive farther to get lied to here. Have a interview at a local machine/off road shop tomorrow. I'll take less $ to enjoy what I do and be closer to home.