does anybody know of a reputable ecu chip burner for obd0 ecus:

setup: ls/vtec stock block, pnp b16 head, ported and port match sk2 im, t3/t4 turbnitcis turbo, 3 bar map, 440 injectors, 255 hi flow walbro pump, aem fuel rail, vortech fmu, fpr, 2.5 inch dp. 12lbs boost cut.

if somebody could burn me a chip for that please let me know asap.
thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LsVteC81 &raquo;</TD></TR><TR><TD CLASS="quote"> 440 injectors, 255 hi flow walbro pump, aem fuel rail, vortech fmuif somebody could burn me a chip for that please let me know asap.
thanks</TD></TR></TABLE>

first problem is 440 with a fmu under boost there will be way too much fuel with the fmu and the injectore,, pick one or the other

 

yeah i understand that. the stock injectors are in there right now. when i find someone to burn me a chip im gonna remove the fmu.

 

Nobody can burn a chip that's going to cover your setup perfectly, requires custom tuenaring.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LsVteC81 &raquo;</TD></TR><TR><TD CLASS="quote">yeah i understand that. the stock injectors are in there right now. when i find someone to burn me a chip im gonna remove the fmu.</TD></TR></TABLE>

email me and ill help

 

anybody can make you a chip in turboedit, but you have to understand it will require tuning to run properly and safely.