clocking a turbo
Thread Starter
Joined: Mar 2003
Posts: 260
Likes: 0
From: stockton, ca, usa
clocking a turbo
i was wondering what bolts do i have to losen to turn the inlet housing on precision sc34.
another question when iam turning the turbo the oil feed and return line are length wise and not up and down. How can i take care of that problem or will i just have to mount the inlet side of turbo towards the drive side.
Modified by spoonspeed at 2:05 AM 8/8/2004
another question when iam turning the turbo the oil feed and return line are length wise and not up and down. How can i take care of that problem or will i just have to mount the inlet side of turbo towards the drive side.
Modified by spoonspeed at 2:05 AM 8/8/2004
Member
Joined: Jun 2001
Posts: 2,888
Likes: 0
From: Dothan, AL
Re: clocking a turbo (spoonspeed)
Loosen the bolts on the exhaust housing. They're on the inside of the center cartridge just to the right of your oil feed (if the turbo is sitting in front of you with inlet on left and exhaust on right).
Thread
Thread Starter
Forum
Replies
Last Post