i replaced my fan switch 'sensor' and my thermostat that are connected to the same housing (my intake radiator hose).. worked for a day perfect.. but once again it's overheating.. i'm pretty sure this time that because my water is flowing better, it caused my water pump to go bad (which was prolly already on its way out)

does anyone have a diagram on where my waterpump is.. or a reference to take everything apart (i'm fearing all my belts are gonna have to come off)

i would really appreciate it.. heh and i almost thought i got away with my overheating problem with $28

thanks!!

 

Did you burp pout he air in the block thru the 12mm bleed screw at the T-stat housing?