Ok im hooking up a 4 wire o2 through my original VX Harness. I dont have the original VX o2 sensor anymore so im a bit lost on one point. heres where i am so far.

heres my brand new OEM 4 wire o2 (shitty pic)



and heres where i cut off the VX harness to make this a clean install with a four wire connector i got at the junkyard. The wires you see are coming from the VX seven wire harness...


So heres how im doing it...
1. o2 green to VX ???

2. o2 white to VX white

3. o2 black to VX orange

4. o2 black to VX Blk/yellow

So the question is, i still have 4 wires hanging. Org/blu , blk, grn/wht, blu/wht.
which one do i connect with the o2 green?? or am i totally off track already? TIA for a tough wiring question....

 

bumpety bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LsVtec92Hatch &raquo;</TD></TR><TR><TD CLASS="quote">1. o2 green to VX ??? </TD></TR></TABLE>

To Grn/Wht

 

but everything else is right?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LsVtec92Hatch &raquo;</TD></TR><TR><TD CLASS="quote">2. o2 white to VX white

3. o2 black to VX orange

4. o2 black to VX Blk/yellow</TD></TR></TABLE>

There is two blacks, you have a 50/50 shot of getting it right. White goes to white.