I am putting my head back on the block and I need to know:

head gasket tq spec, cam cap tq spec, and if the red or white marks on the cam gears is top dead center? thanks

 

http://www.helminc.com

You really ought to have this if you're doing a top end rebuild

 

well i have a mechanic working on it he needed the specs.

 

Is that your mechanic's photo in your avatar?

 

/yourself rainman

cam caps specs are still needed, desperatley

 

anybody have the cam cap specs?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR #1202 &raquo;</TD></TR><TR><TD CLASS="quote">anybody have the cam cap specs?</TD></TR></TABLE>

If your engine builder does not have these on hand with a FSM, you probably should find someone else to put your motor together.

 

Looks like its 20 lb-ft on the camshaft holder plates and 7.2 lb-ft for the little/smaller bolts on the ends.

Tighten from the center ones and work outward to both sides.