TO ALL YOU 92-95 CIVIC OWNERS!!! POST UP
ok here's the deal i wanna see the bragging rights people have in there EG's and such swap's or not
1/4 times and such if you got slips pleast post
what i'm looking for is EG's with LS swaps or H22 swaps (not only those useing them as examples Type R and GSR if there out there plz post lol) wanna see the WHP/Torque your car makes and see what it runs.
so like i said everyone post discuss any idea's on what is the perfect setup for this car.
so have fun
1/4 times and such if you got slips pleast post
what i'm looking for is EG's with LS swaps or H22 swaps (not only those useing them as examples Type R and GSR if there out there plz post lol) wanna see the WHP/Torque your car makes and see what it runs.
so like i said everyone post discuss any idea's on what is the perfect setup for this car.
so have fun
https://honda-tech.com/zerothread?id=836874
Turbo H22 EG.
Dunno what it will run or how much hp. I know I have to tune it then I'll get back to you.
Turbo H22 EG.
Dunno what it will run or how much hp. I know I have to tune it then I'll get back to you.
Trending Topics
B18C5 in a 2040lb. (now it weighs 2010lbs) hatchback on M/T 20'' slicks (small):
13.3@101mph and 13.4@104mph with a 2.0 and 2.1 60 footer.
This was before tuning:

Note the huge-*** gains in the midrange, especially where the rpm drops when shifting into each successive gear.
Looks like a recipe for high 12's if I ever get back to the strip and bust some good 1.8 60 footers.
Oh yeah mods?
Bone stock internals (including cams!) B18C5 with i/h/e and Kenji ECU.
13.3@101mph and 13.4@104mph with a 2.0 and 2.1 60 footer.
This was before tuning:
Note the huge-*** gains in the midrange, especially where the rpm drops when shifting into each successive gear.
Looks like a recipe for high 12's if I ever get back to the strip and bust some good 1.8 60 footers.
Oh yeah mods?
Bone stock internals (including cams!) B18C5 with i/h/e and Kenji ECU.
this has been done a thousand times but...
1992 Civic Si, OBDI B18C1, AEM CAI, JDM DC 4-1, 2.5" cat, GReddy SP cat-back, GC/ITR suspension, 195/60-14 Falken Azenis. No a/c, p/s, or rear seats.
2.01 60'
14.01@99mph
This was about 3 years ago and the last time I ever went to a drag strip.
1992 Civic Si, OBDI B18C1, AEM CAI, JDM DC 4-1, 2.5" cat, GReddy SP cat-back, GC/ITR suspension, 195/60-14 Falken Azenis. No a/c, p/s, or rear seats.
2.01 60'
14.01@99mph
This was about 3 years ago and the last time I ever went to a drag strip.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ebp 99 si »</TD></TR><TR><TD CLASS="quote">thats pretty quick for stock all motor
you should turbo your car tom
then we could see some low low 11's
</TD></TR></TABLE>
Turbo an <FONT COLOR="red"> R </FONT>?. Not the greatest decision there but turbo an LS is more fitted.
you should turbo your car tom
then we could see some low low 11's
</TD></TR></TABLE>Turbo an <FONT COLOR="red"> R </FONT>?. Not the greatest decision there but turbo an LS is more fitted.
stock d16z6, apexi kit at 12 psi, act xtss clutch and lightened flywheel, 2 inch exhaust, 225/50/15 bf goodrich drg radials in a 92 cx
13.649 sec @ 101.85 mph
13.649 sec @ 101.85 mph
Nice times to everyone .
It's really nice to see you guy's Boosting and building on the D series there's a lot o potencial if you give it time.
It's really nice to see you guy's Boosting and building on the D series there's a lot o potencial if you give it time.
1992 EG hatch.....road racer car.....ITR Swap
1993 EG hatch.....drag racer.....built b20vtec
1995 EG hatch.....beater.....d16a
2000 EM1.....b16 with ITB's.....
that's what i got....
1993 EG hatch.....drag racer.....built b20vtec
1995 EG hatch.....beater.....d16a
2000 EM1.....b16 with ITB's.....
that's what i got....
JDM B18CR


dynoed at 169.1 to the wheels.....w/ just i/h/e and hondata.......

havent ran at the track yet but hopin mid to low 13s.....
car is also for sale........https://honda-tech.com/zerothread?id=858140


dynoed at 169.1 to the wheels.....w/ just i/h/e and hondata.......

havent ran at the track yet but hopin mid to low 13s.....
car is also for sale........https://honda-tech.com/zerothread?id=858140
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C5-EH2 »</TD></TR><TR><TD CLASS="quote">B18C5 in a 2040lb. (now it weighs 2010lbs) hatchback on M/T 20'' slicks (small):
13.3@101mph and 13.4@104mph with a 2.0 and 2.1 60 footer.
This was before tuning:

Note the huge-*** gains in the midrange, especially where the rpm drops when shifting into each successive gear.
Looks like a recipe for high 12's if I ever get back to the strip and bust some good 1.8 60 footers.
Oh yeah mods?
Bone stock internals (including cams!) B18C5 with i/h/e and Kenji ECU.
</TD></TR></TABLE>
thats some good power.
.....i wish i had a better intake....would've turned better numbers.........
13.3@101mph and 13.4@104mph with a 2.0 and 2.1 60 footer.
This was before tuning:
Note the huge-*** gains in the midrange, especially where the rpm drops when shifting into each successive gear.
Looks like a recipe for high 12's if I ever get back to the strip and bust some good 1.8 60 footers.
Oh yeah mods?
Bone stock internals (including cams!) B18C5 with i/h/e and Kenji ECU.
</TD></TR></TABLE>
thats some good power.
.....i wish i had a better intake....would've turned better numbers.........
1992 eg6, no swap just the factory b16a, i/h/e, chip, 15" regamaster evo's, no ac, half stripped. 101.4kw at the wheels [should be more, dyno reads low according to the tuner], 14.55 @ 154.8kmh (will scan timeslip soon).
Here's some old photo's, should really take some better ones....
http://community.webshots.com/album/85180163mndecd
Here's some old photo's, should really take some better ones....
http://community.webshots.com/album/85180163mndecd







