i was wondering if there is anyone out there who has a 12-13 second all motor B16?..im at the stage of trying to get my b16 to make more power...and i figure if i can get it in the low 13 to high 12's ill be pretty happy with it for a while...what kind of setup does everyone have that can produce these times?..im gonna be using skunk 2 stage 1 ,or jun 2 cams with a skunk 2 valvetrain mugen headgasket and possibly itb's

 

On slicks, radials, or street tires because that will make a huge difference.

 

Bone stock B16 with only I/H/E and street tires I ran 13.9's at 98mph. Cams, and a mild build will net low 13 times i'm sure.

 

I saw a video of a guy with a red b16 eg on ITB's runnning low 12's on slicks, full interior. Not eaclty sure what his full setup was, but if i remember it was still a 1.6l.

 

I went 13.4 with slicks in my crx. All i had was type r manifold, cam gears and dc 4-2-1 headers, oh and an act clutch. With the b16 it all depends on the weight of your car.

 

My brother ran a 12.80 in a eg with a b16 on 14 inch slicks all motor. It was some funny ****.

 

i did it 4 years ago... check the Sig

 

killerbseries on this board ran a few 12's in his EF on 20" slicks. 185whp on a OMNI built short block and SINISTER head with SK2 stage 1 cams.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lucky one &raquo;</TD></TR><TR><TD CLASS="quote">My brother ran a 12.80 in a eg with a b16 on 14 inch slicks all motor. It was some funny ****.</TD></TR></TABLE>

slicks make a huge difference ...need to save up sum money..

 

well heres what my setup will be..gutted eg..16 inch street tires and wheels,I,h,E,s2s1 cams,diy itb's,skunk valve train,mugen headgasket,cam gears,and probally a katman chipped jdm p30 and a vafc...im looking to hopefuly break into the high 12's with this setup..i might swap to 15 inch wheels with dot cheater slicks

 

It all depends on the launch. I never get to practice. I never take the time to practice that is. So i went out the other day to practice and used a g-tech. heheh... I launched badly, and hit a 16.2 hehehe.... I was toooooo embarassed with myself. I felt like my car was a damn waste. b16a sirII 93 dx hatch, skunk2 intake mani, 4-1 dc type r header, fpr, aem cam gears (set to 0), 6 puck clutch and I hit that slower than sohc time? anyways... driver is a big variable in predicting times.

My .02

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Drag_Racer_DRU &raquo;</TD></TR><TR><TD CLASS="quote">i did it 4 years ago... check the Sig </TD></TR></TABLE>

I remember those days....

Remember the BEEEEEEEEE16, haha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Grip &raquo;</TD></TR><TR><TD CLASS="quote">well heres what my setup will be..gutted eg..16 inch street tires and wheels,I,h,E,s2s1 cams,diy itb's,skunk valve train,mugen headgasket,cam gears,and probally a katman chipped jdm p30 and a vafc...im looking to hopefuly break into the high 12's with this setup..i might swap to 15 inch wheels with dot cheater slicks</TD></TR></TABLE>

if you want 12's you're gonna want slicks and nothin else

 

i ran 13.83@98mph in my 2300lbs crx with a bone stock first gen b16a on 20/6/14 m/t

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88crex &raquo;</TD></TR><TR><TD CLASS="quote">i ran 13.83@98mph in my 2300lbs crx with a bone stock first gen b16a on 20/6/14 m/t</TD></TR></TABLE>

Strong engine!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88crex &raquo;</TD></TR><TR><TD CLASS="quote">i ran 13.83@98mph in my 2300lbs crx with a bone stock first gen b16a on 20/6/14 m/t</TD></TR></TABLE>

I cant trap higher than 92 and I have some mods. Oh well.....

 

i trapped consistant 95mph traps on a stock b16 in a 98 civic 4-dr.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88crex &raquo;</TD></TR><TR><TD CLASS="quote">i ran 13.83@98mph in my 2300lbs crx with a bone stock first gen b16a on 20/6/14 m/t</TD></TR></TABLE>
**** i need to practice more. I got a 14.51 @ 93.35mph with a 1.998 60',outta my B16A