I have a 98 EK Hatch, Im doing a 94 GSR swap in my car i have everything i need for the swap. I was wondering what problems i might run into? I know im gonna have a problem with my exhaust it either gonna be too long or too short. I was wondering if im gonna have a problem with the O2 sensors cause my car has 2 of them. I have a P72ECU that came out of a 98 GSR Teg. IF anyone has a done a swap like this could you please give me some inside on what problems might come up or what i need to do Thanks

 

probably gonn have to swap out the fuel injectors and the distributor. Might have a problem with the crank angle sensor on the ecu...

 

when i swapped my 96 hatch with a 95 gsr the stock gsr header wouldnt bolt to my stock 96 piping. i had to get it extended at the muffler shop. i think u can use a older ls or gsr header and itll bolt up without the cat.. not sure though.

 

Was there any other problems you had besides the exhaust?

 

Is the 94 gsr an obd I or obd II motor?

 

its an OBDI motor

 

Are there any OBD II gsr motors? With the new inspection system they wanna set up here in nys, a obd I engine would not pass in the 99 hatch I am buying.

 

yes theres obd2 gsr motors...96-98 are obd2a 99-00 are obd2b