240 video Turbo
Thread Starter
B*a*n*n*e*d
Joined: Apr 2004
Posts: 820
Likes: 0
From: Placentia, CA, US
Honda-Tech Member
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Re: 240 video Turbo (volcom40street)
That's Scott/Enthalpy's 240. It has gone through some changes since then ... Back then it put down 540whp on a stock piston/rod/sleeve setup.
Trending Topics
Junior Member
Joined: Aug 2002
Posts: 760
Likes: 0
From: WA, USA
Re: 240 video Turbo (0x64)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">That's Scott/Enthalpy's 240. It has gone through some changes since then ... Back then it put down 540whp on a stock piston/rod/sleeve setup.</TD></TR></TABLE>
Any 1/4 mile times? Also, you could obviously hear how he had no traction after boost, in 1st gear but how are the other gears--I couldn't really hear any tire screeching over the motor.
Any 1/4 mile times? Also, you could obviously hear how he had no traction after boost, in 1st gear but how are the other gears--I couldn't really hear any tire screeching over the motor.
Joined: Sep 2002
Posts: 164
Likes: 0
From: SR20 Specialist
Re: 240 video Turbo (0x64)
that video was shot with 400 whp. not 540. I never take the car to the track. i'm not really into drag racing that much. i just like building and tuning my own cars for the challenge. With 540 to the wheels the car would run doors up on the street wiht mid-low 10 sec cars. there is a video of my car racing a SS camaro out there that shows that 
Honda-Tech Member
Joined: Jan 2003
Posts: 7,277
Likes: 1
From: A Place in, Florida, USA
Re: 240 video Turbo (Enthalpy)
Thread
Thread Starter
Forum
Replies
Last Post