anybody got the torque specs
Thread Starter
Junior Member
Joined: Dec 2003
Posts: 124
Likes: 0
From: Detroit, mi, usa
anybody got the torque specs
for everything I will have to re-torque after I do my cam seal today?
I have a Helms for my 95 civic, just not for the b16a in it. any help would be very appreciated...thanks guys
I have a Helms for my 95 civic, just not for the b16a in it. any help would be very appreciated...thanks guys
Joined: Dec 2001
Posts: 781
Likes: 1
From: Southern, California
Re: anybody got the torque specs (b16aEGcivic)
lets see, if i have forgotten something let me know. This is all from the helms for a 99-00 si
Valve cover nuts 7.2lbf-ft
camgear bolts 41 lbf-ft
distributor bolts 17 lbf-ft
Camshaft holders plate 8mm bolts 20 lbf-ft (apply oil to threads
Camshaft holders plate 6mm bolts 7.2 lbf-ft
Crank pulley 130 lbf=ft
If you need any other specs, tightening sequences, or info. let me know
Valve cover nuts 7.2lbf-ft
camgear bolts 41 lbf-ft
distributor bolts 17 lbf-ft
Camshaft holders plate 8mm bolts 20 lbf-ft (apply oil to threads
Camshaft holders plate 6mm bolts 7.2 lbf-ft
Crank pulley 130 lbf=ft
If you need any other specs, tightening sequences, or info. let me know
Thread
Thread Starter
Forum
Replies
Last Post